BINDING POST 8-32
A Pair of solid brass binding posts with base mounting spacer.
This is 8-32 UNC thread. The overall length is 1 inch or 25mm.It is supplied with solder tag.
P/N 01-002 £7.95 Pr.
BINDING POST 6-32
A solid brass binding post with base mounting spacer. This is 6-32 thread a slightly smaller post similar to above.
The overall length is 1 inch or 25mm. It is supplied with solder tag.
P/N 01-003 £3.95 Ea.
SOLID BRASS VINTAGE STYLE PHONES BINDING POSTS
(for Straight Pins) These are 1 inch/25mm high and 3/8 inch /10mm diameter.
Suitable for my new straight pins and also vintage pins.
P/N 01-005 £ POA
BRASS SHAFT COUPLER
This is used with 1/4 inch shaft extenders or direct to capacitors. Secured with two grub screws.
P/N 01-007 £ POA
BRASS COIL SOCKETS
A pair of high quality solid turned brass chassis or front plate mounting sockets.
They are suitable for 4mm standard banana plugs. Supplied with washer and locking nut. Size 12mm x 25mm
P/N 01-008 £ POA
GOLD PLATED BANANA PLUG
4mm Suitable for use with 01-008 shown above.
P/N 01-009 £ POA
BRASS KNURLED NUT 8-32.
P/N 01-010 £ POA
BRASS KNURLED NUT 6-32.
P/N 01-011 £ POA
BRASS EXTENDER SHAFT STANDARD
0.25 inch Diameter, 2 inch long. This is suitable for extending tuning capacitor shafts.
It is standard 1/4 inch diameter.
P/N 01-014 £ POA
BRASS BALL FINIAL
A decorative ball finial for adding the finishing touch to the top of binding posts or spacers.
It is 10mm diameter and has 4mm internal thread.
P/N 01-017 £ POA
BRASS FACEPLATE INSERT M4
Drill a hole and push in the insert. When you tighten an M4 scerw into it this will lock it to the faceplate.
P/N 01-018 £ POA
EXTENDER SHAFT BUSHING
This is secured to the front plate or dial by three brass screws(supplied).
This acts as a bearing for dial pointer. Diameter is 1 inch or 25mm shaft size is standard ¼ inch
P/N 01-020 £ POA
P/N 02-001 £ POA
SOLID BRASS SPACER 25mm x 10mm x M4. This is tapped both ends.
P/N 05-002 £ POA
BLACK NYLON SPACER
This is 2 inch or 50mm long and 1/2 inch or 12.5mm diameter.
There is a threaded M4 hole either end for screw fixing. It is ideal for mounting component boards.